Open Contact Form
Please Contact Us

12V 1A POWER SUPPLY FOR CCTV CAMERA

GENERAL SPECIFICATIONS
Efficiency: 80.5% typical
Switching Frequency: 56-76K Hz.@ full load typical
Circuit Topology: Free-running flyback circuit.
Transient Response: Output voltage returns typical 1mS following a 25% load change
Safety Compliance: cUL, UL, CE, GS, TUV, FCC, LPS, I.T.E. Class II, Double Insulated, indoor use
Power Density: 2.0 Watts / Cubic inch
Operating Temperature: 0 to +40°C with no derating
Storage Temperature: -20 to +85°C
Temperature Coefficient: 0.04% /°C typical
Size 68 mm x 50 mm x 27 mm (2.7 x 2 x 1.1 inches) Desktop
Weight: 110 grams, 4 ounces (not including the cord for the desktop)
Cooling: Free air convection
Construction: Impact resistant thermo-plastic enclosure case
INPUT SPECIFICATION
Input Voltage: Input Voltage: rating 100-240VAC
Input Connector: IEC C7, two prong input socket (desktop version) USA cord included
Input Frequency: 47-63Hz.
OUTPUT SPECIFICATION
Output Voltage: 12.0 Volts
Output Current: 1.0 Amps
Output Wattage: 12 Watts typical
Line Regulation: 0.1% typical
Load Regulation: ±2-3% typical
Noise & Ripple: 1.0% typical peak to peak
Over Voltage Protection (OVP): Built-in, By Zener diode clamping
Overload Protection (OLP) Fully protected against output overload or short circuit. OLP is set at about 120-150% of the rated continous output
12V 1A POWER SUPPLY FOR CCTV CAMERA
12V 1A POWER SUPPLY FOR CCTV CAMERA
12V 1A POWER SUPPLY FOR CCTV CAMERA