MEP Testing, Commissioning & QA

A building is only finished when every system is proven to work. We test, adjust, balance and commission the full MEP scope — ours or another contractor's — and hand over a documented, performance-validated installation that runs right from day one.

Get a Free Quote Enquire about Testing & Commissioning

Architects & PMCs — verify before you shortlist

Compliance, certification & single-point accountability

ISO 9001:2015 Certified quality management
Fire-NOC Designed & liaised in-house
CEIG approval Electrical inspectorate clearance
DISCOM net-metering Solar grid synchronisation
Single-point responsibility One accountable MEPF team
MSME registered Govt.-recognised contractor

What We Deliver

Proven performance before handover.

Electrical testing & pre-commissioning
HVAC Testing, Adjusting & Balancing (TAB)
Fire integrated & cause-and-effect testing
Plumbing pressure & flush testing
Third-party / independent commissioning
O&M manuals, as-builts & operator training

Systems & Products

Every Testing & Commissioning system we engineer — and why it matters

Explore each system below. We've kept it plain: what it is, why it matters for your project, the standards we build to, and the approved makes we use — so you can decide exactly which systems to get a quote for.

Built to: ASHRAE / NEBB TABIS / IEC electrical testsNBC 2016 fire integrationCx / commissioning practice

Electrical Testing & Pre-Commissioning

Insulation, continuity, earth-resistance, phase-sequence, protection-relay and load testing of HT/LT systems, panels, transformers and DG sets before energisation.

Why it matters

Energising an untested installation risks equipment, people and warranty. Structured pre-commissioning proves the system is safe and correct before it goes live.

IR & earth-resistance tests
Relay & protection testing
Phase-sequence & load tests
DG & panel commissioning

Before any HT/LT installation is energised.

Get a quote for this system WhatsApp

HVAC Testing, Adjusting & Balancing (TAB)

Airflow and water-flow balancing, temperature and pressure validation and controls verification across AHUs, chillers, VRF and ventilation systems.

Why it matters

An unbalanced HVAC system wastes energy and never holds design conditions. TAB proves every zone gets rated flow and the plant runs at its designed efficiency.

Air & water balancing
Temperature / pressure validation
Controls & BMS verification
NEBB/ASHRAE reports

Any HVAC system before handover — mandatory for a performing plant.

Get a quote for this system WhatsApp

Fire & Integrated Systems Testing

Cause-and-effect testing of fire detection, suppression, pumps, PA and their integration with HVAC, lifts and access control — the test the fire service witnesses.

Why it matters

In a fire, the systems must act as one. Integrated cause-and-effect testing proves detection triggers the right suppression, evacuation and shutdown sequence.

Cause-and-effect matrix
Pump & flow testing
PA / evacuation testing
BMS integration checks

Every fire system pre-NOC and pre-occupancy.

Get a quote for this system WhatsApp

Why only Secured Engineers Pvt. Ltd.

Why clients pick us for Testing & Commissioning

India's #1 MEPF mindset: we don't just supply a system — we design it, get it approved, and execute it as one accountable team.

We own the approvals

Fire-NOC, CEIG and DISCOM handled in-house — so your testing & commissioning scope clears inspection the first time.

One team, all MEPF

No finger-pointing between trades. A single accountable partner from design to commissioning.

535+ projects, 89.77% repeat

15+ years across 18+ states, 93%+ delivered early — proof, not promises.

Approved makes only

Tier-1 brands and IS/IEC-grade materials on every system — never the cheapest substitute.

Get a Free Quote

Explore Other Services

Mechanical / HVAC

Precision cooling, ventilation & thermal comfort.

Electrical

Reliable power, safely engineered.

Plumbing

Water, drainage & public health, done right.

Fire Protection

Life-safety systems you can rely on.

One accountable partner · design → approvals → commissioning

Have a testing & commissioning project?

Send your BOQ, tender or drawings and get a rate analysis and budgetary proposal from an engineer — within one working day.

ISO 9001:2015 Certified
535+ projects · 18+ states
Reply in 1 working day

Upload BOQ / drawings Share your BOQ, tender or drawings — get item-wise rate analysis and a budgetary proposal. Send on WhatsApp Request a site visit Our engineers assess your site and scope, then return a firm, buildable proposal. Book a site visit Speak to an engineer Talk scope, timelines, compliance and value-engineering directly with our team. +91 70099 87817 Download company profile 535+ projects, marquee clients, certifications and full delivery capability — PDF. Download PDF

FAQ

Testing & Commissioning — frequently asked questions

Do you commission MEP systems installed by another contractor?

Yes. We provide independent, third-party testing and commissioning of electrical, HVAC, fire and plumbing systems — whether we installed them or another contractor did — and hand over a documented, performance-validated installation.

What is HVAC TAB and why does my building need it?

TAB — Testing, Adjusting & Balancing — measures and balances every air and water flow so each zone gets its design condition and the plant runs at its rated efficiency. An unbalanced system wastes energy and never holds temperature; TAB per NEBB/ASHRAE proves it performs before handover.

What documentation do you hand over at commissioning?

Full commissioning records, test reports (electrical, TAB, fire cause-and-effect), O&M manuals, as-built drawings and operator training — everything you need to run and maintain the building from day one and to satisfy statutory and insurance requirements.

Do you carry out fire integrated (cause-and-effect) testing for the Fire NOC?

Yes. We run the cause-and-effect testing the fire service witnesses — proving detection triggers the correct suppression, evacuation, HVAC shutdown and lift-homing sequence — as part of the pre-NOC and pre-occupancy commissioning.

Need Testing & Commissioning for your project?

Get a free consultation and quote. We design, take all approvals, and execute — you stay stress-free.

Get a Free Quote WhatsApp Us +91 70099 87817