MEP Consultant for Industrial & Commercial Projects — Design, Drawings & BOQs

Name: Secured Engineers Private Limited — Noida (Delhi NCR)
Address: Supertech, Astralis Supernova, Sector 94, Noida, Uttar Pradesh, 201301, IN
Telephone: +91 70099 85817

We design the MEP — coordinated drawings, load calculations, BOQs and specifications — and we file the statutory approvals the design needs. Appoint us for the design alone, with approvals and execution scoped separately, or for the full package: the same engineers do both.

Available as a standalone consultancy appointment: you can enquire about MEP design, a drawing or BOQ review, or design coordination without awarding execution. Approvals and execution are quoted as their own scopes.

Discuss my MEP design requirement Request a drawing or BOQ review

Discuss your MEP design, review or coordination requirement

Tell us which of the three you need and where the project is. An engineer reads the enquiry, confirms the inputs and deliverables with you, and only then proposes a scoped appointment — nothing is engineered before that.

Faster on WhatsApp? Message us — same engineer, no form.

What do you need? New project or expansion — MEP design and documentation Existing drawings, BOQ or proposal — technical review and scope check Architect / PMC coordination — shafts, plant rooms, ceiling zones, trades

Full name

Mobile number

Project city

Project state (optional)

Required service / scope

Project details (optional)

Add project details (optional — company, type, stage, timeline, size)

Company name (optional)

Business email (optional)

Project type (optional)

Project stage (optional)

Desired start timeline (optional)

Approximate project size or capacity (optional)

Estimated project value (optional)

Have drawings, a BOQ, a tender document or a proposal? Send it on WhatsApp — it reaches the same engineer who reads this form.

I agree to be contacted by Secured Engineers Pvt. Ltd. about this enquiry. We do not share your details. See our Privacy Policy.

Architects & PMCs — verify before you shortlist

Compliance, approvals & single-point accountability

Registered company CIN U31900PB2013PTC037158
Fire-NOC Designed & liaised in-house
CEIG approval Electrical inspectorate clearance
DISCOM net-metering Solar grid synchronisation
Single-point responsibility One accountable MEPF team
MSME registered Govt.-recognised contractor

In one paragraph

Design & Approvals by Secured Engineers Pvt. Ltd.

Secured Engineers Pvt. Ltd. is an MEPF and solar EPC contractor, in business since 2011, with its registered office in Ludhiana, Punjab and corporate office in Noida, Uttar Pradesh (Delhi NCR). For design & approvals, Secured Engineers Pvt. Ltd. provides MEP design and statutory approvals — detailed MEP design and BIM, load calculations and system sizing, Fire NOC and fire-department liaison, CEIG and electrical-inspectorate approval, DISCOM and net-metering approvals, and pollution-board and local-authority consents — as a standalone consultancy or as the front end of its own turnkey execution. 535+ projects across 18+ Indian states.

Enquiries: +91 70099 85817 · sales@securedengineers.com · request a project proposal

Three ways to start

Which of these is your requirement?

Each is a different conversation with different inputs. Pick the closest; the engineer confirms the rest with you.

New project or expansion — MEP design and documentation

Owners, developers and PMCs starting a factory, warehouse, commercial or institutional building, or extending one.

What you send

Architectural plans, sections and the site plan
Occupancy, process and equipment loads
The stage you need — concept, design basis, tender or good-for-construction
Whether execution will be in-house or by other contractors

What the appointment produces

Load calculations and system sizing
Coordinated MEP drawings for the agreed stage
BOQ and specifications where tendering is in scope

Next step: An engineer confirms the disciplines, the stage and the deliverables with you before any design starts.

Start this enquiry

Existing drawings, BOQ or proposal — technical review and scope check

Buyers holding a consultant's set, a contractor's BOQ or a tender before award.

What you send

The drawing set, BOQ or proposal as it stands
What the review has to settle — scope gaps, quantity basis, makes, compliance
The date the answer is needed by

What the appointment produces

Review observations against the documents supplied
Scope and quantity gaps named line by line
What to change before the submission or the award

Next step: The documents go by email or WhatsApp; the discipline engineer confirms what the review will cover before starting.

Start this enquiry

Architect or PMC coordination — shafts, plant rooms, ceiling zones and trades

Architects and project managers who need the services coordinated before shafts are cast and ceilings are fixed.

What you send

The architectural scheme and the structural grid
Ceiling heights, shaft positions and plant-room allowances so far
The disciplines involved and the stage of the architecture

What the appointment produces

Coordinated services sections with shaft, plant-room and ceiling-zone sizing
Clash detection across trades where BIM is in scope
Marked-up inputs for the architectural and structural drawings

Next step: The coordination is scoped against your drawings first; design work follows only once that scope is agreed.

Start this enquiry

An enquiry is an introductory scoping conversation, not a commissioned assignment. An engineer reads what you send, confirms the inputs, deliverables and stage with you, and only then proposes an appointment — no drawings, BOQs or engineered layouts are produced before that scope is agreed. Documents go by email or WhatsApp, as on every enquiry on this site. What to have ready →

Design work on record

Published project records that state a design or consultancy role, in the record's own words. The pages are as published; the underlying appointments are not independently re-verified here.

Chandigarh Sectors 32 & 43 — Consultancy — Consultancy for Sectors 32 and 43, as described in our published company profile. Scope on record: MEP Design.
NXP — Bespoke MEP Design Reference — Bespoke MEP design for NXP, as described in our published company profile. Scope on record: MEP Design.

What We Deliver

MEP design, coordinated drawings, calculations and BOQs — standalone, with approvals and execution scoped separately.

Detailed MEP design, coordinated drawings & shop drawings
Load calculations & system sizing
BOQs, specifications & tender documentation
Fire-NOC & fire-department liaisoning
CEIG / electrical inspectorate approvals
DISCOM / net-metering approvals
Pollution board & local authority clearances

Design and approval scopes

Choose the design and approval support your project needs

These are available scopes, not a compulsory package. Your appointment identifies the design disciplines and deliverables; approval support is agreed separately.

Built to: NBC 2016CEA RegulationsState Fire rulesRelevant IS / IEC codes

Detailed MEP Design & BIM

Concept-to-good-for-construction MEP design — drawings, schematics, BIM coordination and clash-detection across all trades.

Why it matters

Design decided on paper is cheap to change; design decided on site is not. BIM coordination helps identify clashes before procurement where it is included in the appointment.

Concept → GFC drawings
BIM / clash detection
Multi-trade coordination
Tender BOQ documentation (for your tendering)

Any new build or major retrofit needing engineered MEP documentation.

Discuss this scope WhatsApp

Load Calculations & System Sizing

Heat-load, electrical-load, water-demand and fire-demand calculations that correctly size every system to code.

Why it matters

Over-sizing wastes capital; under-sizing fails in use and inspection. Calculations establish a documented sizing basis from the agreed loads and operating requirements.

Heat & electrical loads
Water & fire demand
Diversity & growth factors
Code-compliant sizing

Every project — the basis of correct, economical engineering.

Discuss this scope WhatsApp

Fire NOC & Fire-Department Liaisoning

Fire scheme drawings, submissions and end-to-end liaisoning with the state fire department for provisional and final NOC.

Why it matters

Where Fire NOC support is appointed, we prepare the scheme and submission documents and coordinate responses to authority queries. Approval remains the authority's decision.

Fire-scheme drawings
Provisional & final NOC
Department liaisoning
Inspection readiness

Any building legally requiring a Fire-NOC.

Discuss this scope WhatsApp

CEIG / Electrical Inspectorate

Electrical drawings and statutory CEIG/electrical-inspectorate approvals for HT installations, substations and DG sets.

Why it matters

Where electrical-inspectorate support is required and appointed, we compile the documents and coordinate inspection. Sanction and energisation depend on the authority, utilities and site readiness.

HT / substation drawings
CEIG submission
Inspection coordination
Energisation support

Any HT supply, substation or DG installation.

Discuss this scope WhatsApp

DISCOM / Net-Metering Approvals

Feasibility, application and net-metering approval with the DISCOM for grid-connected solar and new connections.

Why it matters

If included in the appointment, we support the DISCOM application and queries. Feasibility, sanction and commissioning depend on the applicable process and project readiness.

Connection & load applications
Net-metering sanction
Feasibility & documentation
DISCOM coordination

Grid-tied solar plants and new/enhanced power connections.

Discuss this scope WhatsApp

Pollution Board & Local Authority

Consent-to-establish/operate, building-plan and other local-authority clearances needed for occupancy and operation.

Why it matters

Where separately appointed, we identify the relevant submissions and support documentation and authority queries. Consent decisions remain with the responsible authority.

Consent to establish / operate
Building-plan approvals
Local-body clearances
Compliance documentation

Factories, treatment plants and any regulated occupancy.

Discuss this scope WhatsApp

State guides

MEP consultant in Noida, Delhi NCR, Ludhiana and Punjab

The same design and approvals team works from our Noida corporate office and our Ludhiana registered office. If you are looking for an MEP consultant in a particular city, these pages carry the local authorities, the DISCOM and the projects on record there.

MEP consultant and contractor in Noida — Corporate office in Sector 94 — PVVNL/NPCL net-metering, the UP fire authority and the Chief Electrical Inspector, UP.
MEP consultant in Delhi NCR — Delhi, Gurugram, Faridabad and Ghaziabad — Delhi Fire Service, the Haryana and UP fire authorities, three Delhi DISCOMs.
MEP consultant in Ludhiana — Registered head office — PSPCL load sanction, Punjab Fire and Emergency Services and the Chief Electrical Inspector, Punjab.
MEP consultant in Gurugram — IMT Manesar and the Gurugram industrial belt — DHBVN, Haryana Fire and Emergency Services and CEI Haryana.
MEP consultant in Chandigarh tri-city — Chandigarh, Mohali and Panchkula — served from Ludhiana with the Punjab and Haryana authorities.

Scope of services — what each stage delivers

The appointment follows the scope you agree with us: new design, document review or coordination. The deliverables and programme are confirmed against the supplied information before work starts.

Stage-wise scope of services for Design & Approvals: deliverables, governing codes, output artefact and typical duration
Stage	Deliverables	Codes & standards referenced	Output artefact	Typical duration
1 Agree the appointment	Confirm new design, drawing/BOQ review or coordination scope Agree disciplines, inputs, design stage and revision allowance Set the fee, deliverables and programme	Project requirements and applicable codes identified during scoping	Agreed scope and input list	Confirmed with the fee proposal
2 Prepare the agreed design or review	Design: calculations and drawings for the appointed disciplines and stage Review: observations against the supplied drawings, BOQ or proposal BOQs, specifications and BIM only where included in the appointment	Applicable discipline codes and agreed design basis	Design or review package for the agreed scope	Based on scope and complete inputs
3 Coordinate and resolve comments	Discuss interfaces with the architect and other appointed disciplines Record comments, decisions and outstanding inputs Issue revisions within the agreed allowance	Agreed design basis and project coordination requirements	Coordinated revisions and comment record	Based on review cycles and responses
4 Issue and hand over	Issue the agreed drawings, calculations, BOQ or review report Identify the issue purpose and remaining dependencies Confirm any separately appointed approval or site-support scope	Agreed issue stage and document requirements	The consultancy deliverables listed in the appointment	Agreed programme

The fee proposal sets the disciplines, design stage, revision allowance, inputs and programme. Statutory submissions, authority liaison, site supervision and execution are included only when separately agreed. Authority decisions and processing times remain outside the consultancy team's control.

Buyer's guide

Before you ask us to quote design & approvals

Secured Engineers Pvt. Ltd. quotes design & approvals for industrial, commercial and institutional facilities across India, and this is what its engineers ask for first. What to have ready, what moves the price and the programme, which approvals apply, and the mistakes seen most often — so the first conversation is a useful one.

What to have ready

Architectural drawings — plans, sections and site plan
Occupancy, use and any process or equipment loads
Built-up area and building height
Sanctions and approvals already held
The state and local authority — which fire service, DISCOM and pollution board apply
Design stage required: concept, design basis, tender or good-for-construction
Whether execution will be in-house or by other contractors, which changes the deliverables

What drives the cost

Built-up area and complexity of the building
Number of disciplines and the deliverable level — concept, tender, GFC or BIM
Number of approvals and authorities involved
Number of revision cycles as the architecture changes
Site visits and inspection attendance
Statutory fees, which are paid to the authorities and sit outside the consultancy fee

What drives the timeline

Authority processing times, which vary by state and by portal
Completeness and stability of the architectural inputs
Inspection scheduling and shortfall cycles
Sequential dependencies — DISCOM sanction, then CEIG, then energisation

Approvals that usually apply

Fire NOC — provisional and final
CEIG drawing approval and inspection
DISCOM load sanction and net-metering
State pollution-board consent to establish and operate for STP/ETP, DG sets and boilers
MEP inputs to the building-plan sanction and to Factories Act plan approval where the building is a factory
Lift inspectorate where lifts are installed

Standards and codes we design to

NBC 2016
CEA Regulations
State Fire rules
Relevant IS / IEC codes

Maintenance after handover

For a design and approvals scope, 'maintenance' means keeping the approvals valid: Fire NOC renewal, periodic CEIG inspection, pollution-board consent renewal and factory-licence renewal, plus re-approval when the building's use or load changes.

See our AMC and maintenance scope →

Mistakes we see most often

Starting construction before the scheme approvals
Treating approvals as a formality at the end rather than a sequence that gates the programme
Architectural changes not carried into the approved MEP scheme, so the inspection finds a variance
Fire-tank capacity fixed before the fire scheme exists
Sanctioned load applied for without a load list
No owner-side record of what was submitted, approved and inspected

Have most of this to hand? Send your enquiry — an engineer confirms the scope, inputs and deliverables with you before any design or review work is commissioned.

Published consultancy references

Consultancy work in our company profile

Our Company Profile 2025 describes consultancy and MEP design roles on the projects below. Each reference should be read against its stated scope; it does not imply an execution appointment or an authority approval.

Urban Infrastructure

Chandigarh Sectors 32 & 43 — Consultancy

Chandigarh projects · Chandigarh · MEP Design

Technology / R&D

NXP — Bespoke MEP Design Reference

NXP Semiconductors · · MEP Design

All projects →

Where we deliver

Design & Approvals from our Noida and Ludhiana offices

Projects are run from two offices. Each office page lists the local approvals and the services delivered in that region.

Noida — corporate office (Delhi NCR)

Supertech, Astralis Supernova, Sector 94, Noida, Uttar Pradesh 201301, India. Noida, Greater Noida, Ghaziabad, Delhi, Gurugram and Faridabad.

Ludhiana — registered head office (Punjab)

2480/1, Gill Rd, near Grewal Hospital, Janta Nagar, Ludhiana, Punjab 141003. Punjab, Chandigarh and Himachal Pradesh.

Plan your project

Find the right service for your project, anywhere in India

Choose your scope and project location. Review the service, explore local coverage or send an enquiry with both details already filled in.

Our offices are in Noida, Ludhiana and New Delhi (Kalu Sarai). A location selection requests a project review; it does not confirm local staff, mobilisation or aftercare.

Service needed Project city or area

Discuss your project Review service scope Explore local coverage

Your selections will be carried into the enquiry. You can edit them there.

Why only Secured Engineers Pvt. Ltd.

Why clients pick us for Design & Approvals

We design it, we can file it and we can build it — and you choose how much of that to appoint.

A defined appointment

Agree the disciplines, design stage, deliverables and fee before engineering starts.

Coordination in scope

Specify the interfaces with your architect, structural engineer and other trades in the appointment.

Published design work

Read the project examples and discuss the experience relevant to your requirement.

Approvals by agreement

Design can stand alone. Approval support and execution are separately scoped when you need them.

Discuss my MEP design requirement

Explore Other Services

HVAC contractor

Precision cooling, ventilation & thermal comfort.

Electrical contractor

Reliable power, safely engineered.

PHE contractor

Water, drainage & public health, done right.

Fire fighting contractor

Life-safety systems you can rely on.

Scope the appointment

Discuss the design or review you need

Share the project stage and available documents. We confirm the inputs, deliverables and fee proposal before starting engineering work. Approval support and execution are separately agreed.

Discuss a consultancy appointment

Use the enquiry form to choose new design, drawing/BOQ review or architect coordination.

Share drawings for scoping

Send available documents on WhatsApp so we can discuss what a commissioned review would cover.

Speak about your requirement

Discuss the disciplines, location and project stage. +91 70099 85817

Read our company profile for the published project background.

Related guides and tools

How to select an MEP contractor — What to check and what to ask before appointing the team that will design and file your approvals.
Fire NOC drawing checklist — Inputs to discuss when scoping a fire-scheme drawing and submission package.
NBC fire and life-safety checklist — Compartmentation, travel distance and refuge provision — architectural decisions the approval is judged against.
Green rating checklist — IGBC and GRIHA credits that depend on MEP design, and when each has to be decided to stay claimable.
Statutory approvals roadmap — The full sequence — fire NOC, CEIG, pollution consent, factory licence — and what gates what.
How to choose an MEP consultant in India — What a design consultant should hand over, the records to insist on, and why a design-and-build team is priced differently.
When municipal approvals force a redesign — The sanction conditions that come back from the authority and rewrite the services design — and how to pre-empt them.
Turnkey MEPF — the integrated package — What the integrated contract covers after the design and the approvals are in hand.

FAQ

Design & Approvals — frequently asked questions

What does an MEP consultant do?

An MEP consultant designs a building's mechanical, electrical and plumbing services before they are built: load calculations, coordinated drawings for HVAC, power, lighting, fire fighting, plumbing and low-voltage systems, the BOQ and specifications for tendering, and checks during execution. We take that design as a standalone appointment, with statutory approvals and execution scoped separately.

Can I appoint you as an electrical, HVAC, plumbing or fire-fighting consultant only?

Yes. The design appointment can cover one discipline or all of them: an electrical consultant's load study, single-line diagram and panel schedules; an HVAC consultant's heat-load and duct design; a plumbing (PHE) consultant's water, drainage and STP sizing; a fire-fighting consultant's hydrant, sprinkler and pump-room design; or ELV and solar design. Each is scoped and quoted on its own.

Can you do only the MEP design and statutory approvals, without execution?

Yes. We offer standalone MEP design and approvals — full drawings, load calculations and compliance documentation — and we secure fire-NOC, CEIG, factory licensing, pollution-board consent and net-metering, whether or not you use us for execution.

What happens after I send a design, review or coordination enquiry?

An engineer reads it, comes back to confirm the inputs you have, the stage and the deliverables you need, and only then proposes a scoped appointment. No drawings, BOQs or layouts are produced before that scope is agreed, and you can send documents by email or WhatsApp at any point.

Which statutory approvals do you handle?

Fire-NOC (provisional and final), CEIG/electrical-inspectorate, factory licensing, pollution-board consent, DISCOM net-metering and local-authority building approvals — managed end to end so your project stays compliant.

Why do buildings often not match the drawings?

Because design and site execution are usually run by different teams with no accountability bridge. We design and execute under one contract — the theme of our founder's book, From AutoCAD to Actual Site — so what's drawn is what gets built.

Discuss an MEP design, review or coordination appointment

Send the enquiry above, or call. An engineer confirms the scope with you first; approvals and execution are quoted separately.

Discuss my MEP design requirement WhatsApp Us +91 70099 85817

MEP Consultant for Industrial & Commercial Projects — Design, Drawings & BOQs

Discuss your MEP design, review or coordination requirement

Compliance, approvals & single-point accountability

Design & Approvals by Secured Engineers Pvt. Ltd.

Which of these is your requirement?

New project or expansion — MEP design and documentation

What you send

What the appointment produces

Existing drawings, BOQ or proposal — technical review and scope check

What you send

What the appointment produces

Architect or PMC coordination — shafts, plant rooms, ceiling zones and trades

What you send

What the appointment produces

Design work on record

MEP design, coordinated drawings, calculations and BOQs — standalone, with approvals and execution scoped separately.

Choose the design and approval support your project needs

Detailed MEP Design & BIM

Load Calculations & System Sizing

Fire NOC & Fire-Department Liaisoning

CEIG / Electrical Inspectorate

DISCOM / Net-Metering Approvals

Pollution Board & Local Authority

MEP consultant in Noida, Delhi NCR, Ludhiana and Punjab

Scope of services — what each stage delivers

Before you ask us to quote design & approvals

What to have ready

What drives the cost

What drives the timeline

Approvals that usually apply

Standards and codes we design to

Maintenance after handover

Mistakes we see most often

Consultancy work in our company profile

Chandigarh Sectors 32 & 43 — Consultancy

NXP — Bespoke MEP Design Reference

Design & Approvals from our Noida and Ludhiana offices

Noida — corporate office (Delhi NCR)

Ludhiana — registered head office (Punjab)

Find the right service for your project, anywhere in India

Why clients pick us for Design & Approvals

A defined appointment

Coordination in scope

Published design work

Approvals by agreement

Explore Other Services

HVAC contractor

Electrical contractor

PHE contractor

Fire fighting contractor

Discuss the design or review you need

Discuss a consultancy appointment

Share drawings for scoping

Speak about your requirement

Related guides and tools

Design & Approvals — frequently asked questions

Discuss an MEP design, review or coordination appointment

Guides that reference this page

Related on this site