Solar mounting structures and balance of system — wind-engineered structures, DC cabling and protection
Wind-engineered galvanised mounting structures, DC/AC cabling, MC4 connectors, combiner boxes and balance-of-system components.
Enquire: Mounting Structures & BOS
Step 1 of 3
Your request is in
One of our engineers will call you shortly.
Mounting Structures & BOS by Secured Engineers Pvt. Ltd.
Secured Engineers Pvt. Ltd. — an ISO 9001:2015-certified MEPF and solar EPC contractor with offices in Ludhiana, Punjab and Noida (Delhi NCR) — provides Mounting Structures & BOS as part of its Solar EPC scope: Wind-engineered galvanised mounting structures, DC/AC cabling, MC4 connectors, combiner boxes and balance-of-system components. 535+ projects across 18+ Indian states.
Enquiries: +91 70099 87817 · sales@securedengineers.com · request a project proposal
What this system decides for your project
Structures must survive decades of wind and weather on your roof. Engineered GI structures and rated BOS prevent leaks, corrosion and the failures that void module warranties.
You need a quote for this if: Every solar installation — the structural and electrical foundation.
Scope of work
The structure is designed for the roof it sits on — RCC, metal sheet or ground — and for the wind load at the site, with the tilt and row spacing from the shadow analysis, and the fixing method chosen to protect the roof: ballasted or anchored on RCC, clamped to the purlins on sheet roofs, piled or footed on ground. Elevated structures keep the roof usable where that matters. The balance of system covers DC cabling sized for voltage drop, MC4 connectors, combiner boxes with fuses and surge protection, AC cabling and the earthing of the array. We supply and install all of it.
How it is delivered — and what you receive
The roof's capacity to carry the structure is confirmed before the design is frozen, and a structural stability certificate issued where the DISCOM or the client requires it. Fixings are torqued and inspected, penetrations sealed, and the array earthing tested. The client receives the structural design and certificate, the layout as-built and the earthing test record.
Sources and standards
- MNRE ALMM — Approved List of Models and Manufacturers (ALMM) for solar PV modules. Ministry of New and Renewable Energy. Publisher.Which module models and manufacturers are eligible for government-linked and subsidised solar projects.
- IEC 61215 / IEC 61730 — IEC 61215 (design qualification) and IEC 61730 (safety qualification) — photovoltaic modules. International Electrotechnical Commission. Publisher.Module qualification and safety testing.
- IEC 62109 — IEC 62109 — Safety of power converters for use in photovoltaic power systems. International Electrotechnical Commission. Publisher.Inverter safety.
- CEA (Measures relating to Safety and Electric Supply) Regulations (2023 (superseding the 2010 regulations)) — Central Electricity Authority (Measures relating to Safety and Electric Supply) Regulations. Central Electricity Authority. Publisher.Safety requirements for electrical installations, inspection of HT installations before energisation, periodic inspection, earthing and protection.
Standards are cited to support the technical statements on this page. Where a standard has been revised, the edition shown is the one verified at the time of review; the edition in force for a project is the one the authority applies.
Before you ask us to quote: the Solar EPC buyer's guide lists what to have ready, what drives cost and timeline, and the approvals that usually apply.
Makes we specify for Mounting Structures & BOS
Tier-1 manufacturers whose equipment we design around and install. The specification names the make; the site is held to it.
Related to Mounting Structures & BOS
The terms behind it
Run the numbers
Read before you specify
Need Mounting Structures & BOS for your project?
Get a free consultation and quote. We design, take all approvals, and execute — you stay stress-free.