CEIG / Electrical Inspector Readiness Checker
CEIG / Electrical Inspector Readiness Checker — quick estimate
Not sure if your installation needs Electrical Inspector (CEIG) approval — or how close your file is to inspection-ready? Enter your connection, substation and DG details, tick off what's done, and get an indicative applicability read plus a readiness score. Then let our electrical team take the drawing-to-clearance file end-to-end.
Your installation
Indicative guidance based on the Electricity Act 2003 and CEA safety regulations, as administered by the state Chief Electrical Inspectorate / Directorate of Electrical Safety. HT connections (11 kV+), substations/transformers and DG sets of consequence are typically in scope; LT-only micro-units may sit below the threshold. Confirm current triggers with your state inspectorate.
Get your CEIG file taken end-to-end — free review
Our electrical engineers will confirm the applicable triggers for your state, prepare the SLD/earthing/protection drawing set, run the pre-inspection tests and carry the file through to clearance. We'll attach your inputs above automatically.
Your request is in
Thanks! Our electrical team will review your installation and send the applicable CEIG scope and next steps within one business day.
This tool is indicative only and is NOT a regulatory determination. Actual CEIG/Electrical Inspector applicability, document requirements and timelines are governed by the Electricity Act 2003, CEA regulations and state inspectorate practice, and vary by state. A licensed electrical contractor and the inspectorate are the final word — which we coordinate as part of our service.
Need an exact BOQ, rate analysis or measurement sheet?
This is a quick engineering estimate. For tendering, billing or audit, our QS & estimation team prepares an item-wise BOQ, rate analysis and a verified measurement sheet to IS / CPWD norms — backed by 15+ years and ISO 9001:2015 quality processes.