Skip to content
Secured Engineers Pvt. Ltd. logo
+91 70099 85817 Submit RFQ Get a Free Quote
Home
Company Insights Resources Locations & project coverage About Founder — Er. Ankur Kaplesh
Services Mechanical / HVACElectricalPlumbingFire ProtectionLow Voltage / ELVSolar EPCMEP Consultancy & ApprovalsAMC / MaintenanceTurnkey EPCFire NOC AssistanceCEIG Liaison & EnergisationTesting & Commissioning AI Video Analytics
Industries Manufacturing & IndustrialHealthcare & HospitalsHospitality & HotelsWarehousing & LogisticsGovernment & DefenceEducation & InstitutionsData CentrePharmaceutical & CleanroomCold StorageTextile & ApparelAutomobile & Auto-ComponentsFood Processing & FMCGChemical & Process Industries
Free Tools ★ Architect & Design Resource Hub All 56 calculators Solar Financial Calculator Fire Water Storage Checker Fire Pump Room Calculator AC Tonnage Calculator DG Load Calculator MEPF Budget Calculator
Projects Work With Us Submit RFQ Get a Free Quote

MEP Consultant for Industrial & Commercial Projects — Design, Drawings & BOQs

Appoint us for MEP design, review of existing drawings and BOQs, or coordination and tender support. We agree the disciplines, calculations, documents and issue stage before work starts. Authority liaison, site supervision and installation are separate appointments unless expressly included.

Available as a standalone consultancy appointment: you can enquire about MEP design, a drawing or BOQ review, or design coordination without awarding execution. Approvals and execution are quoted as their own scopes.

Request an MEP Design Proposal Discuss My Drawings and BOQ

Discuss your MEP design, review or coordination requirement

Tell us which of the three you need and where the project is. An engineer reads the enquiry, confirms the inputs and deliverables with you, and only then proposes a scoped appointment — nothing is engineered before that.

What do you need?
Add project details (optional — company, type, stage, timeline, size)

This is for the design, review or coordination appointment. It is separate from construction costs. Leave it blank if not finalised; scope is agreed before a fee is proposed.

Architects & PMCs — verify before you shortlist

Compliance, approvals & single-point accountability

  • Registered company CIN U31900PB2013PTC037158
  • Fire-NOC Designed & liaised in-house
  • CEIG approval Electrical inspectorate clearance
  • DISCOM net-metering Solar grid synchronisation
  • Single-point responsibility One accountable MEPF team
  • MSME registered Govt.-recognised contractor
In one paragraph

Design & Approvals by Secured Engineers Pvt. Ltd.

Secured Engineers Pvt. Ltd. is an MEPF and solar EPC contractor, in business since 2011, with its registered office in Ludhiana, Punjab and corporate office in Noida, Uttar Pradesh (Delhi NCR). For design & approvals, Secured Engineers Pvt. Ltd. offers standalone MEP design, drawing and BOQ review, and coordination or tender support. The appointment defines the disciplines, calculations, drawings, BOQ and issue stage. BIM, authority liaison, site support and execution are included only when separately agreed; authority approval is not a consultancy deliverable.

Enquiries: +91 70099 85817 · sales@securedengineers.com · request an MEP design proposal

Three ways to start

Which of these is your requirement?

Each is a different conversation with different inputs. Pick the closest; the engineer confirms the rest with you.

Working on a UAE project? Explore remote MEP design, drawing and BOQ review support, with an enquiry route for UAE project teams.

New project or expansion — MEP design and documentation

Owners, developers and PMCs starting a factory, warehouse, commercial or institutional building, or extending one.

What you send

  • Architectural plans, sections and the site plan
  • Occupancy, process and equipment loads
  • The stage you need — concept, design basis, tender or good-for-construction
  • Whether execution will be in-house or by other contractors

Deliverables to agree

  • Load calculations and system sizing
  • Coordinated MEP drawings for the agreed stage
  • BOQ and specifications where tendering is in scope

Next step: An engineer confirms the disciplines, the stage and the deliverables with you before any design starts.

Start this enquiry

Existing drawings, BOQ or proposal — technical review and scope check

Buyers holding a consultant's set, a contractor's BOQ or a tender before award.

What you send

  • The drawing set, BOQ or proposal as it stands
  • What the review has to settle — scope gaps, quantity basis, makes, compliance
  • The date the answer is needed by

Deliverables to agree

  • Review observations against the documents supplied
  • Scope and quantity gaps named line by line
  • What to change before the submission or the award

Next step: The documents go by email or WhatsApp; the discipline engineer confirms what the review will cover before starting.

Start this enquiry

Architect or PMC coordination and tender support

Architects and project managers who need the services coordinated before shafts are cast and ceilings are fixed.

What you send

  • The architectural scheme and the structural grid
  • Ceiling heights, shaft positions and plant-room allowances so far
  • The disciplines involved and the stage of the architecture

Deliverables to agree

  • Coordinated services sections with shaft, plant-room and ceiling-zone sizing
  • Clash detection across trades where BIM is in scope
  • Marked-up inputs for the architectural and structural drawings
  • Tender clarifications and revision responses where agreed

Next step: The coordination is scoped against your drawings first; design work follows only once that scope is agreed.

Start this enquiry

An enquiry is an introductory scoping conversation, not a commissioned assignment. An engineer reads what you send, confirms the inputs, deliverables and stage with you, and only then proposes an appointment — no drawings, BOQs or engineered layouts are produced before that scope is agreed. Documents go by email or WhatsApp, as on every enquiry on this site. What to have ready →

Design work on record

Published project records that state a design or consultancy role, in the record's own words. The pages are as published; the underlying appointments are not independently re-verified here.

Agree the deliverables

What belongs in your MEP consultancy proposal?

Select the disciplines and outputs your project needs. These are available services, included only when agreed in the appointment; a drawing review does not automatically include redesign.

Deliverables to agree before engineering starts
ScopePossible outputConfirm in the proposal
Brief and design basisOccupancy, operating requirements, design assumptions and the inputs still needed.Building use, area, loads, disciplines and design criteria.
Calculations and system selectionElectrical, heat-load, water-demand or fire-system calculations for the appointed disciplines.Source data, sizing assumptions and specialist studies required.
Discipline drawings and schedulesElectrical SLD and load schedules; HVAC selections and layouts; PHE and fire drawings, as applicable.Drawing list, interfaces, issue stage and file formats.
CoordinationService routes, shafts, plant rooms and ceiling interfaces coordinated with the supplied architecture and structure.Other designers’ inputs, review meetings and any BIM deliverables.
BOQ, specifications and tender supportQuantities, specifications and responses to technical tender queries where appointed.Quantity basis, exclusions, tender rounds and responsibility for bid evaluation.
Revisions and issueAgreed revisions with the issue purpose and unresolved dependencies identified.Included review cycles, extra revisions and the review/acceptance process.

Concept, tender and GFC are different issues

Concept
System options, preliminary loads and space allowances for decisions. Assumptions remain to be resolved.
Tender
Drawings, BOQ and specifications for pricing the defined scope. Tender issue is not construction release.
Good for construction (GFC)
Coordinated documents issued for construction after the agreed inputs and reviews. Check the revision, issue status and outstanding conditions before use.

Approvals scoped separately. Design or submission assistance is not statutory approval. Authority liaison, supervision, site visits and travel, extra revisions and specialist studies must be explicitly included or excluded.

Keep the roles clear. Installation is optional and separately appointed. If SEPL also bids for execution, agree the conflict disclosure and evaluation process; assessment of our own bid cannot be described as independent.

Fee and project value are different. Discuss the consultancy scope and fee separately from total project investment or the installation package. You can start with the budget not finalised.

Request an MEP design proposal
Design and approval scopes

Choose the design and approval support your project needs

These are available scopes, not a compulsory package. Your appointment identifies the design disciplines and deliverables; approval support is agreed separately.

Built to: NBC 2016CEA RegulationsState Fire rulesRelevant IS / IEC codes

Detailed MEP Design & BIM

Concept-to-good-for-construction MEP design — drawings, schematics, BIM coordination and clash-detection across all trades.

Why it matters

Design decided on paper is cheap to change; design decided on site is not. BIM coordination helps identify clashes before procurement where it is included in the appointment.

  • Concept → GFC drawings
  • BIM / clash detection
  • Multi-trade coordination
  • Tender BOQ documentation (for your tendering)
Any new build or major retrofit needing engineered MEP documentation.
Discuss this scope WhatsApp

Load Calculations & System Sizing

Heat-load, electrical-load, water-demand and fire-demand calculations that correctly size every system to code.

Why it matters

Over-sizing wastes capital; under-sizing fails in use and inspection. Calculations establish a documented sizing basis from the agreed loads and operating requirements.

  • Heat & electrical loads
  • Water & fire demand
  • Diversity & growth factors
  • Code-compliant sizing
Every project — the basis of correct, economical engineering.
Discuss this scope WhatsApp

Fire NOC & Fire-Department Liaisoning

Fire scheme drawings, submissions and end-to-end liaisoning with the state fire department for provisional and final NOC.

Why it matters

Where Fire NOC support is appointed, we prepare the scheme and submission documents and coordinate responses to authority queries. Approval remains the authority's decision.

  • Fire-scheme drawings
  • Provisional & final NOC
  • Department liaisoning
  • Inspection readiness
Any building legally requiring a Fire-NOC.
Discuss this scope WhatsApp

CEIG / Electrical Inspectorate

Electrical drawings and statutory CEIG/electrical-inspectorate approvals for HT installations, substations and DG sets.

Why it matters

Where electrical-inspectorate support is required and appointed, we compile the documents and coordinate inspection. Sanction and energisation depend on the authority, utilities and site readiness.

  • HT / substation drawings
  • CEIG submission
  • Inspection coordination
  • Energisation support
Any HT supply, substation or DG installation.
Discuss this scope WhatsApp

DISCOM / Net-Metering Approvals

Feasibility, application and net-metering approval with the DISCOM for grid-connected solar and new connections.

Why it matters

If included in the appointment, we support the DISCOM application and queries. Feasibility, sanction and commissioning depend on the applicable process and project readiness.

  • Connection & load applications
  • Net-metering sanction
  • Feasibility & documentation
  • DISCOM coordination
Grid-tied solar plants and new/enhanced power connections.
Discuss this scope WhatsApp

Pollution Board & Local Authority

Consent-to-establish/operate, building-plan and other local-authority clearances needed for occupancy and operation.

Why it matters

Where separately appointed, we identify the relevant submissions and support documentation and authority queries. Consent decisions remain with the responsible authority.

  • Consent to establish / operate
  • Building-plan approvals
  • Local-body clearances
  • Compliance documentation
Factories, treatment plants and any regulated occupancy.
Discuss this scope WhatsApp
State guides

MEP consultant in Noida, Delhi NCR, Ludhiana and Punjab

The same design and approvals team works from our Noida corporate office and our Ludhiana registered office. If you are looking for an MEP consultant in a particular city, these pages carry the local authorities, the DISCOM and the projects on record there.

Scope of services — what each stage delivers

The appointment follows the scope you agree with us: new design, document review or coordination. The deliverables and programme are confirmed against the supplied information before work starts.

Stage-wise scope of services for Design & Approvals: deliverables, governing codes, output artefact and typical duration
Stage Deliverables Codes & standards referenced Output artefact Typical duration
1 Agree the appointment
  • Confirm new design, drawing/BOQ review or coordination scope
  • Agree disciplines, inputs, design stage and revision allowance
  • Set the fee, deliverables and programme
 Project requirements and applicable codes identified during scoping Agreed scope and input list Confirmed with the fee proposal
2 Prepare the agreed design or review
  • Design: calculations and drawings for the appointed disciplines and stage
  • Review: observations against the supplied drawings, BOQ or proposal
  • BOQs, specifications and BIM only where included in the appointment
 Applicable discipline codes and agreed design basis Design or review package for the agreed scope Based on scope and complete inputs
3 Coordinate and resolve comments
  • Discuss interfaces with the architect and other appointed disciplines
  • Record comments, decisions and outstanding inputs
  • Issue revisions within the agreed allowance
 Agreed design basis and project coordination requirements Coordinated revisions and comment record Based on review cycles and responses
4 Issue and hand over
  • Issue the agreed drawings, calculations, BOQ or review report
  • Identify the issue purpose and remaining dependencies
  • Confirm any separately appointed approval or site-support scope
 Agreed issue stage and document requirements The consultancy deliverables listed in the appointment Agreed programme

The fee proposal sets the disciplines, design stage, revision allowance, inputs and programme. Statutory submissions, authority liaison, site supervision and execution are included only when separately agreed. Authority decisions and processing times remain outside the consultancy team's control.

Buyer's guide

Before you ask us to quote design & approvals

Secured Engineers Pvt. Ltd. quotes design & approvals for industrial, commercial and institutional facilities across India, and this is what its engineers ask for first. What to have ready, what moves the price and the programme, which approvals apply, and the mistakes seen most often — so the first conversation is a useful one.

What to have ready

  • Architectural drawings — plans, sections and site plan
  • Occupancy, use and any process or equipment loads
  • Built-up area and building height
  • Sanctions and approvals already held
  • The state and local authority — which fire service, DISCOM and pollution board apply
  • Design stage required: concept, design basis, tender or good-for-construction
  • Whether execution will be in-house or by other contractors, which changes the deliverables

What shapes the consultancy fee

  • Built-up area and complexity of the building
  • Number of disciplines and the deliverable level — concept, tender, GFC or BIM
  • Approval-support responsibilities, if separately appointed
  • Number of revision cycles as the architecture changes
  • Site visits, travel, inspection attendance and specialist studies included in the scope
  • Statutory fees, which are paid to the authorities and sit outside the consultancy fee

What drives the timeline

  • Completeness and stability of the architectural inputs
  • Required disciplines, issue stage and agreed deliverables
  • Responses from the client, architect and other appointed designers
  • Revision allowance, tender-query rounds and required decision dates
  • Authority processing and inspection scheduling only where approval support is appointed

Approval support if separately appointed

  • Fire NOC — provisional and final
  • CEIG drawing approval and inspection
  • DISCOM load sanction and net-metering
  • State pollution-board consent to establish and operate for STP/ETP, DG sets and boilers
  • MEP inputs to the building-plan sanction and to Factories Act plan approval where the building is a factory
  • Lift inspectorate where lifts are installed

Standards and codes we design to

  • NBC 2016
  • CEA Regulations
  • State Fire rules
  • Relevant IS / IEC codes

After the agreed document issue

Agree who resolves later site queries, checks contractor submissions and updates documents after a change. Supervision, as-built records, extra revisions and renewal support require an explicit scope; they do not follow automatically from a design appointment.

Mistakes we see most often

  • Comparing fees without matching the disciplines, outputs and revision allowance
  • Using concept or tender drawings as construction documents
  • Treating a drawing or BOQ review as a full redesign
  • Changing architecture or equipment loads without updating the design basis
  • Confusing document submission, client acceptance and statutory approval
  • Assuming an execution bidder can independently evaluate its own bid

Have most of this to hand? Send your enquiry — an engineer confirms the scope, inputs and deliverables with you before any design or review work is commissioned.

Published consultancy references

Consultancy work in our company profile

Our Company Profile 2025 describes consultancy and MEP design roles on the projects below. Each reference should be read against its stated scope; it does not imply an execution appointment or an authority approval.

Urban Infrastructure

Chandigarh Sectors 32 & 43 — Consultancy

Chandigarh projects · Chandigarh · MEP Design

 Technology / R&D

NXP — Bespoke MEP Design Reference

NXP Semiconductors · · MEP Design

All projects →

Where we deliver

Design & Approvals from our Noida and Ludhiana offices

Projects are run from two offices. Each office page lists the local approvals and the services delivered in that region.

Noida — corporate office (Delhi NCR)

Supertech, Astralis Supernova, Sector 94, Noida, Uttar Pradesh 201301, India. Noida, Greater Noida, Ghaziabad, Delhi, Gurugram and Faridabad.

Ludhiana — registered head office (Punjab)

2480/1, Gill Rd, near Grewal Hospital, Janta Nagar, Ludhiana, Punjab 141003. Punjab, Chandigarh and Himachal Pradesh.
Plan your project

Find the right service for your project, anywhere in India

Choose your scope and project location. Review the service, explore local coverage or send an enquiry with both details already filled in.

Our offices are in Noida, Ludhiana and New Delhi (Kalu Sarai). A location selection requests a project review; it does not confirm local staff, mobilisation or aftercare.

Discuss your project Review service scope Explore local coverage

Your selections will be carried into the enquiry. You can edit them there.

Why only Secured Engineers Pvt. Ltd.

Why clients pick us for Design & Approvals

We design it, we can file it and we can build it — and you choose how much of that to appoint.

A defined appointment

Agree the disciplines, design stage, deliverables and fee before engineering starts.

Coordination in scope

Specify the interfaces with your architect, structural engineer and other trades in the appointment.

Published design work

Read the project examples and discuss the experience relevant to your requirement.

Approvals by agreement

Design can stand alone. Approval support and execution are separately scoped when you need them.

Request an MEP Design Proposal

Explore Other Services

HVAC contractor

Precision cooling, ventilation & thermal comfort.

Electrical contractor

Reliable power, safely engineered.

PHE contractor

Water, drainage & public health, done right.

Fire fighting contractor

Life-safety systems you can rely on.

Scope the appointment

Discuss the design or review you need

Share the project stage and available documents. We confirm the inputs, deliverables and fee proposal before starting engineering work. Approval support and execution are separately agreed.

Discuss a consultancy appointment

Use the enquiry form to choose new design, drawing/BOQ review or architect coordination.

Share drawings for scoping

Send available documents on WhatsApp so we can discuss what a commissioned review would cover.

Speak about your requirement

Discuss the disciplines, location and project stage. +91 70099 85817

Read our company profile for the published project background.

Related guides and tools

FAQ

Design & Approvals — frequently asked questions

What does an MEP consultant do?

An MEP consultant designs a building's mechanical, electrical and plumbing services before they are built: load calculations, coordinated drawings for HVAC, power, lighting, fire fighting, plumbing and low-voltage systems, the BOQ and specifications for tendering, and checks during execution. We take that design as a standalone appointment, with statutory approvals and execution scoped separately.

Can I appoint you as an electrical, HVAC, plumbing or fire-fighting consultant only?

Yes. The design appointment can cover one discipline or all of them: an electrical consultant's load study, single-line diagram and panel schedules; an HVAC consultant's heat-load and duct design; a plumbing (PHE) consultant's water, drainage and STP sizing; a fire-fighting consultant's hydrant, sprinkler and pump-room design; or ELV and solar design. Each is scoped and quoted on its own.

Can you do only the MEP design and statutory approvals, without execution?

Yes. We offer standalone MEP design and approvals — full drawings, load calculations and compliance documentation — and we secure fire-NOC, CEIG, factory licensing, pollution-board consent and net-metering, whether or not you use us for execution.

What happens after I send a design, review or coordination enquiry?

An engineer reads it, comes back to confirm the inputs you have, the stage and the deliverables you need, and only then proposes a scoped appointment. No drawings, BOQs or layouts are produced before that scope is agreed, and you can send documents by email or WhatsApp at any point.

Which statutory approvals do you handle?

Fire-NOC (provisional and final), CEIG/electrical-inspectorate, factory licensing, pollution-board consent, DISCOM net-metering and local-authority building approvals — managed end to end so your project stays compliant.

Why do buildings often not match the drawings?

Because design and site execution are usually run by different teams with no accountability bridge. We design and execute under one contract — the theme of our founder's book, From AutoCAD to Actual Site — so what's drawn is what gets built.

Discuss an MEP design, review or coordination appointment

Send the enquiry above, or call. An engineer confirms the scope with you first; approvals and execution are quoted separately.

Request an MEP Design Proposal +91 70099 85817

Guides that reference this page

Related on this site

ONE PARTNER. END TO END. You focus on your business — we handle the rest.
Quality Safety Commitment
Ask about approvals