Industrial electrical contractor in Ludhiana — HT/LT substations, panels, DG and the CEIG filing
We are an industrial electrical contractor for Ludhiana, working from our registered head office in the city: HT/LT distribution and substations, transformers and DG sets, PCC, MCC and APFC panels, cabling and bus ducts, earthing and lightning protection — from the load study and single-line diagram through installation, testing and the inspectorate's approval.
Size the backup first with the DG sizing calculator →
15+ years · 535+ projects · Ludhiana head office
Electrical systems we design and install in Ludhiana
HT/LT distribution and substations
11 kV and 33 kV intake, indoor and outdoor substations, LT distribution — designed to the DISCOM's supply code and the inspectorate's drawings.
Transformers and DG sets
Transformer and DG installation with AMF and synchronisation, acoustic enclosures and the emission norms the pollution board consent carries.
LT panels — PCC, MCC, APFC
Panels built to IEC 61439, power-factor correction sized from the load study, type-tested where the inspectorate asks for it.
Cabling, cable trays and bus ducts
LT/HT cabling, trays and bus ducts sized on derating, routed and coordinated against ducts and sprinkler mains before pulling.
Earthing and lightning protection
IS 3043 earthing systems and lightning protection, with pit-by-pit resistance records handed over for the inspection.
Industrial lighting and small power
Lux-level design, LED fittings and small-power distribution for production floors, warehouses and offices.
The full national scope — HT/LT distribution and the plant behind it — is on our electrical contractor service page.
Choosing among electrical contractors in Ludhiana — what to compare
Quotes look alike until you ask how the work is done. Ask every bidder:
- Is the transformer sized from a load study with diversity, or from the connected load?
- Are cables sized on derating for the actual tray fill and ambient, with the calculation shown?
- Will the earthing be tested pit by pit, with the resistance records handed over for the inspection?
- Who draws the single-line diagram the inspectorate will stamp — and who attends the inspection?
- Are relay settings and discrimination calculated, tested by secondary injection and recorded?
The full procurement checklist is in how to select an industrial electrical contractor.
Where the electrical scope meets the approvals in Ludhiana
An HT installation, a substation or a DG set cannot be energised in Punjab until the Chief Electrical Inspector to Government of Punjab has inspected it; the DISCOM sanctions the load, and the DG set's acoustic enclosure and stack sit inside the PPCB (Punjab Pollution Control Board) consent. We run the three in parallel so energisation is not waiting on paperwork.
The step-by-step is on CEIG approval in Punjab, with what the inspectorate checks on DG sets and the CEIG readiness checklist.
Electrical work on our project record
Projects from our published record with electrical in the delivered scope — 3 of them located in Ludhiana.
Operational Excellence for a Logistics Major
Turnkey multi-trade logistics & warehousing project · Nahar Logistics
Institutional · Ludhiana, PunjabFire Fighting & Electrical for GADVASU Campus
Two-trade institutional project · GADVASU
Data Center · Ludhiana, PunjabElectrical, Fire & ELV for Fastway Data Center
Turnkey multi-trade data center project · Fastway
Urban Infrastructure · ChandigarhShaping the Chandigarh Skyline — Sector 32 & 43
Turnkey multi-trade urban infrastructure project · CHD
Electrical contractor for Ludhiana's industrial estates
One team covers the estates; the DISCOM, the feeder and the site conditions change by estate. Each estate page carries the authority, the DISCOM and the questions its units ask us.
Tell us about your project
An engineer reviews every enquiry — not a call centre. The more you can tell us about scope and stage, the more useful our first reply will be.
Thank you. Our engineering team will review your requirement and contact you shortly.
If it's urgent, call +91 70099 85817 or message us on WhatsApp.
Electrical work in Ludhiana — straight answers
Which authority inspects an HT installation in Ludhiana?
The Chief Electrical Inspector to Government of Punjab. HT installations, substations and DG sets are inspected before energisation; we prepare the single-line diagram, the test records and the filing, and attend the inspection.
Who sanctions the power connection for a Ludhiana factory?
PSPCL (Punjab State Power Corporation Limited), the sole DISCOM for all of Punjab. PSPCL's FAQ gives LT supply up to 100 kVA of demand and HT above it; we prepare the load application and the sanction documents either way.
Do you handle the CEIG filing as part of the electrical contract?
Yes. The drawings, the test records (insulation, earth resistance by pit, relay injection, transformer and DG tests) and the inspectorate submission are part of the scope, so energisation is not waiting on paperwork.
Is your office in Ludhiana?
Yes. Our registered head office is at 2480/1, Gill Rd, near Grewal Hospital, Janta Nagar, Ludhiana, Punjab 141003; our corporate office is in Noida.
Do you maintain the electrical installation after handover?
Yes, under an annual maintenance contract covering the substation, panels, DG and earthing alongside the fire, HVAC and solar systems, with preventive schedules and defined response times.
Put an electrical engineer on your project
Send the connected load, the single-line diagram if you have one and the site location. We will come back with the supply option, the inspectorate route and what the scope should include.