MEP Contractor & Consultant in IMT Rohtak, Rohtak
IMT Rohtak is Haryana's roughly 4,000-acre industrial township on NH-10, developed by HSIIDC to draw manufacturing away from Delhi-NCR — we deliver the power, HVAC, fire and solar infrastructure that its auto-ancillary and general manufacturing plants need to operate reliably.
Solar here: Solar EPC contractor and consultant in Haryana
IMT Rohtak is a roughly 4,000-acre industrial township on NH-10, developed by HSIIDC to extend Delhi-NCR's manufacturing base westward into a broad mix of general engineering and auto-ancillary plants. Secured Engineers Pvt. Ltd. delivers turnkey MEPF and solar EPC for factories across IMT Rohtak and the wider Rohtak industrial belt.
General manufacturing and auto-ancillary units need dependable HT/LT power and coordinated protection for continuous production lines, process-specific HVAC and ventilation, and fire protection built to NBC 2016 from day one. We engineer HT/LT distribution, substations, transformers, synchronised DG and APFC, industrial HVAC, and ELV/BMS systems, and secure UHBVN sanction, CEIG approval and net-metering in-house.
We round out the scope with fire-hydrant, sprinkler and detection systems and the Haryana fire-NOC, plus rooftop solar with UHBVN net-metering to lower operating costs on IMT Rohtak's large plot sizes. One accountable team owns design, statutory approvals and execution across every trade.
What we deliver for Rohtak's industry
IMT Rohtak is one of several estates we cover as MEP contractor and consultant in Rohtak — the same scope, approvals and single-contract delivery applies across the city.
Electrical
Reliable power, safely engineered.
Mechanical / HVAC
Precision cooling, ventilation & thermal comfort.
Fire Protection
Life-safety systems you can rely on.
Low Voltage / ELV
Smart, secure, connected buildings.
Solar EPC
Engineered solar that pays for itself.
Turnkey EPC
One partner, one accountability, whole project.
The statutory route for a plant in IMT Rohtak
A factory on this estate sits under HSIIDC (Haryana State Industrial & Infrastructure Development Corporation), and the electricity connection runs through UHBVN. Applicable approvals depend on the plant use, electrical installation and scope. Confirm the statutory sequence before fixing the commissioning programme; an authority decides its own approvals.
- Fire NOC for factories in Haryana — the fire scheme is reviewed against NBC 2016 and the state Fire Act. It is the approval most often started too late, because it depends on drawings fixed months earlier.
- Electrical Inspector (CEIG) approval — any HT installation, substation or DG set needs it before UHBVN will energise the connection.
- Factory licence and DISH approval — plan approval from the Directorate of Industrial Safety and Health before you commission.
Building or expanding here? As MEP contractor and consultant for factory projects we cover design, approvals and execution under one contract — or see warehouse MEP contractor and consultant if the shed is for storage and distribution. For plants that need more than MEPF — utilities, process-side electrical, statutory approvals across trades — the industrial engineering contractor and consultant page is the cross-sector view.
IMT Rohtak's industries, in depth
Other industrial zones we serve
Every estate in Haryana is on the Haryana industrial zones page, and every state we cover on the industrial zones hub; the city itself is on MEPF & solar in Rohtak.
Have a project in IMT Rohtak?
Send your BOQ, tender or drawings and get a rate analysis and budgetary proposal from an engineer — within one working day.
- 535+ projects · 18+ states
- Reply in 1 working day
MEPF & solar in IMT Rohtak, Rohtak — FAQs
Do you handle UHBVN power sanction and CEIG approval in IMT Rohtak?
Yes — HT/LT load sanction with UHBVN and electrical inspector (CEIG) approval are handled in-house for auto-ancillary and general manufacturing units across IMT Rohtak, alongside HSIIDC plot and layout compliance.
What industries do you commonly work with in IMT Rohtak?
Mainly general manufacturing, auto-ancillary and engineering/fabrication units — we size electrical, HVAC and fire systems for continuous-production plants typical of this HSIIDC estate.
Can you get the Haryana fire NOC for a factory in IMT Rohtak?
Yes — we design fire-hydrant, sprinkler and detection systems to NBC 2016 and obtain the NOC from Haryana Fire and Emergency Services under the state's 2022 Fire Act for units across IMT Rohtak.
Is rooftop solar viable given the large plot sizes in IMT Rohtak?
Yes — larger plots mean more roof and open-yard area for solar; we design, install and commission rooftop and ground-mount solar with UHBVN net-metering for IMT Rohtak factories.
Start your IMT Rohtak, Rohtak project today
Get a free consultation and quote. We design, prepare and file your approvals, and execute — you deal with one team.
Guides that reference this page
- Setting Up a Factory in IMT Rohtak: Power, Fire NOC, CEIG and Solar
- A Digital Twin Is Not a 3D Model. It Is a Live Data Obligation.
- The Most Dangerous Electrical Installation You Will Ever Own Is the Temporary One
- Three Vendors, One Roof, Three Different Generation Figures.
- Your BOQ Said 1,000 M. Site Said 1,470 M. Who Pays for the Missing 470 M?
- Kenya National Building Code 2024: what it means for MEP design
Related on this site
- termSolar EPC
- termTurnkey EPC
- termOpen Access (Solar)
- serviceNet-Metering, Metering & Monitoring (Solar EPC)
- serviceSoil, Waste & Rainwater Drainage (Plumbing)
- calculatorFactory Downtime Cost Calculator
- calculatorSolar Battery Storage Calculator
- buyer's guideHow to Select an MEP Contractor
- guideNBC 2016 fire and life safety for factories
- guideFire NOC for factories
- estateKundli Industrial Area, Sonipat
- estateBarhi Industrial Area, Sonipat
- estateRai Industrial Estate, Sonipat
- stateSolar policy in Haryana
- stateSolar EPC contractor and consultant in Haryana