AHU, FCU and ducting contractor and consultant —air-handling units and air distribution

Scope

Scope of work

The air side is designed from the room-by-room supply-air quantities — CFM, throw, fresh-air fraction and filtration grade — into AHU and FCU selections, duct routes sized for static pressure and velocity, and the terminals: VAV or CAV boxes, diffusers, grilles, volume-control dampers and fire dampers at every compartment crossing. Filtration runs from G4 pre-filters to HEPA where the space needs it. We fabricate the GI or aluminium ductwork to SMACNA practice, and supply and install the AHUs, FCUs, ducts, insulation, terminals and airflow stations.

How it is delivered — and what you receive

Duct routes are coordinated against cable trays, sprinkler mains and beams before fabrication, because the ceiling void is the most contested space on any project. Ductwork is leak-tested in sections and insulated, and the system is balanced outlet by outlet — testing, adjusting and balancing — so the designed air actually reaches each room. Fire dampers are tested and their positions recorded on the Fire NOC drawing. The client receives the balancing report, the duct as-built and the filter schedule.

Sources and standards

• NBC 2016 Part 8 (2016) — National Building Code of India 2016, Part 8 — Building Services. Bureau of Indian Standards. Publisher. Lighting, ventilation, air-conditioning, electrical installations, lifts and escalators — the building-services framework.

Standards are cited to support the technical statements on this page. Where a standard has been revised, the edition shown is the one verified at the time of review; the edition in force for a project is the one the authority applies.

Before you ask us to quote: the Mechanical / HVAC buyer's guide lists what to have ready, what drives cost and timeline, and the approvals that usually apply. Writing the tender? The hvac & mechanical specification library has 4 code-referenced clauses architects and consultants can drop into tender documents.