VRF / VRV system contractor and consultant —zoned air-conditioning designed, piped and commissioned

Scope

Scope of work

Zoning comes first — which areas share an outdoor unit, which need simultaneous heating and cooling (heat recovery), and where the outdoor units can sit without exceeding the pipe-length and height limits the manufacturer publishes. From that we select outdoor and indoor units, design the refrigerant piping with its branch selectors and joints, size the condensate drainage, and specify centralised or app-based controls. Supply and installation cover the units, copper piping and insulation, drain lines, control wiring and the outdoor-unit platforms.

How it is delivered — and what you receive

Refrigerant piping is brazed under nitrogen, pressure-tested and vacuum-held before charging, with the additional charge calculated from the actual pipe lengths rather than estimated. Each indoor unit is addressed and commissioned on the controller, and the system is run through cooling and heating modes with readings recorded. Fresh-air provision is designed alongside, because VRF alone does not ventilate — a point that matters at the fire and health inspections. The client receives the piping as-built, the charge record and the controller configuration.

Sources and standards

• NBC 2016 Part 8 (2016) — National Building Code of India 2016, Part 8 — Building Services. Bureau of Indian Standards. Publisher. Lighting, ventilation, air-conditioning, electrical installations, lifts and escalators — the building-services framework.

Standards are cited to support the technical statements on this page. Where a standard has been revised, the edition shown is the one verified at the time of review; the edition in force for a project is the one the authority applies.

Before you ask us to quote: the Mechanical / HVAC buyer's guide lists what to have ready, what drives cost and timeline, and the approvals that usually apply. Writing the tender? The hvac & mechanical specification library has 4 code-referenced clauses architects and consultants can drop into tender documents.