Industrial electrical contractor in Noida — HT/LT substations, panels, DG and the CEIG filing
We are an industrial electrical contractor for Noida, working from our corporate office in Sector 94: HT/LT distribution and substations, transformers and DG sets, PCC, MCC and APFC panels, cabling and bus ducts, earthing and lightning protection — from the load study and single-line diagram through installation, testing and the inspectorate's approval.
Size the backup first with the DG sizing calculator →
15+ years · 535+ projects · Noida corporate office
Electrical systems we design and install in Noida
HT/LT distribution and substations
11 kV and 33 kV intake, indoor and outdoor substations, LT distribution — designed to the DISCOM's supply code and the inspectorate's drawings.
Transformers and DG sets
Transformer and DG installation with AMF and synchronisation, acoustic enclosures and the emission norms the pollution board consent carries.
LT panels — PCC, MCC, APFC
Panels built to IEC 61439, power-factor correction sized from the load study, type-tested where the inspectorate asks for it.
Cabling, cable trays and bus ducts
LT/HT cabling, trays and bus ducts sized on derating, routed and coordinated against ducts and sprinkler mains before pulling.
Earthing and lightning protection
IS 3043 earthing systems and lightning protection, with pit-by-pit resistance records handed over for the inspection.
Industrial lighting and small power
Lux-level design, LED fittings and small-power distribution for production floors, warehouses and offices.
The full national scope — HT/LT distribution and the plant behind it — is on our electrical contractor service page.
Choosing among electrical contractors in Noida — what to compare
Quotes look alike until you ask how the work is done. Ask every bidder:
- Is the transformer sized from a load study with diversity, or from the connected load?
- Are cables sized on derating for the actual tray fill and ambient, with the calculation shown?
- Will the earthing be tested pit by pit, with the resistance records handed over for the inspection?
- Who draws the single-line diagram the inspectorate will stamp — and who attends the inspection?
- Are relay settings and discrimination calculated, tested by secondary injection and recorded?
The full procurement checklist is in how to select an industrial electrical contractor.
Where the electrical scope meets the approvals in Noida
An HT installation, a substation or a DG set cannot be energised in Uttar Pradesh until the Chief Electrical Inspector to Government of UP has inspected it; the DISCOM sanctions the load, and the DG set's acoustic enclosure and stack sit inside the UPPCB (Uttar Pradesh Pollution Control Board) consent. We run the three in parallel so energisation is not waiting on paperwork.
The step-by-step is on CEIG approval in Uttar Pradesh, with what the inspectorate checks on DG sets and the CEIG readiness checklist.
Electrical work on our project record
Projects from our published record with electrical in the delivered scope — one of them located in Delhi NCR.
Electrical & HVAC for Salcon Commercial Development
Two-trade commercial project · Salcon
Urban Infrastructure · ChandigarhShaping the Chandigarh Skyline — Sector 32 & 43
Turnkey multi-trade urban infrastructure project · CHD
Industrial · IndiaElectrical & Mechanical for a Global Manufacturer
Turnkey multi-trade industrial project
Technology / R&D · IndiaBespoke MEP for a Global Semiconductor Leader
Turnkey multi-trade technology / r&d project · NXP Semiconductors
Electrical contractor for Noida's industrial estates
One team covers the estates; the DISCOM, the feeder and the site conditions change by estate. Each estate page carries the authority, the DISCOM and the questions its units ask us.
Tell us about your project
An engineer reviews every enquiry — not a call centre. The more you can tell us about scope and stage, the more useful our first reply will be.
Thank you. Our engineering team will review your requirement and contact you shortly.
If it's urgent, call +91 70099 85817 or message us on WhatsApp.
Electrical work in Noida — straight answers
Which authority inspects an HT installation in Noida?
The Chief Electrical Inspector to Government of UP. HT installations, substations and DG sets are inspected before energisation; we prepare the single-line diagram, the test records and the filing, and attend the inspection.
Who sanctions the power connection for a Noida factory?
Gautam Buddh Nagar is in the PVVNL (Pashchimanchal Vidyut Vitran Nigam) area, with parts of Greater Noida — including the Ecotech pockets — served by NPCL. We prepare the load application and the sanction documents for whichever licensee serves the plot.
Do you handle the CEIG filing as part of the electrical contract?
Yes. The drawings, the test records (insulation, earth resistance by pit, relay injection, transformer and DG tests) and the inspectorate submission are part of the scope, so energisation is not waiting on paperwork.
Is your office in Noida?
Yes. Our corporate office is at Supertech, Astralis Supernova, Sector 94, Noida, Uttar Pradesh 201301, India; our registered office is in Ludhiana, Punjab.
Do you maintain the electrical installation after handover?
Yes, under an annual maintenance contract covering the substation, panels, DG and earthing alongside the fire, HVAC and solar systems, with preventive schedules and defined response times.
Put an electrical engineer on your project
Send the connected load, the single-line diagram if you have one and the site location. We will come back with the supply option, the inspectorate route and what the scope should include.